Reply to "throw out and Clutch Pedal linkage"

jfb05177Member

quote:
Originally posted by jb1490:..
With the measurements that are in my notes, the ratio would be 0.725:1. Using 0.1" at the slave would give 0.0725" at the PP fingers...
John

my intuition was the other way on that! I recalled I had a photo of my ZF input shaft, counting pixels, I see that the ratio would be as you stated. so with your noted 0.725:1 ratio, the lever lenghts would be 1.8"/2.5"

Looking at the photo (and after studying parts drawings), Should I have return springs around the shaft to ensure the TOB fully disengages? or is just the spring at the slave sufficient?

Attachments

Hide

Images (1)

11/28/153:00 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Attachments

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...