Reply to "throw out and Clutch Pedal linkage"

goodrocMember

The external Spring at your Slave Cylinder is sufficient. The Arm(Fork) that pushes the ToB forward is also pulling it away from the Clutch again when you release the Clutch Pedal by use of that same Spring. Check the play with the Spring disconnected and Engine/Trans warm. I believe the less play the better (from own experience) but some play is obviously required. If I remember correctly I have about 1,5mm (measured at Slave Cylinder)

I am not sure was your objective is by those calculations? (maybe I missed it somewhere in your text) Are you after a softer Clutch then you can also consider a Booster.
Booster
I was at an earlier point planning something like that, but just got used to the Pantera Clutch along the way I suppose.

11/28/154:41 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...