Reply to "Timing mark"

snaponbobMember

Had a wire bush (toothbrush shaped) and just laid it on the balancer with the engine idling. Found the marks !!!! Used the vacuum method but that had me at 22-23 degrees at idle, so set the timing to 16 degrees, and buttoned it up. So, something else off the checklist. Re-installed the factory air filter and it does NOT like it above 4000 rpm. I think the flapper valve on the snorkel may not be opened properly.

7/28/1310:43 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...