Skip to main content

Reply to "tORQUE SPECS AND RODS?"

If you are reassembling your engine and people suggest you inspect your rods it is mainly to see if where they connect are still within spec. Over time they made need to go .010 over or so.... Also anytime you have the rods out or have loosened them up it is a better idea to replace with new Grade 8 or higher like ARP. You see a bolt, when initially tightened, will perform to spec. However when you loosen and subsequently retighten it is weaker then before. Regardless of how minute the change may be but the constant tightening and loosening of bolts weakens them inherently... Take a rod bolt. It has a raised area along the top of the shaft under the football head designed to be pressed into the rod. When the bolt is removed - the form fitting metal which served to secure the bolt doesn't "magically bounce back"...

Trust me the security with replacing your bolts far outways any agrument for not doing it...

Dave
×
×
×
×