The lower moulding usually gets screwed on, I did it when the glass was out. it may be hard(impossible?) to get at with glass still in. Be careful 1/2" is too long and will cause a dimple on the outside. You can run the screw thru the felt and use it to hold both the felt and moulding on or you can screw on the moulding and epoxy the felt
PANTERA INTERNATIONAL
A DE TOMASO CAR CLUB
Presents the De Tomaso Forums
The On-Line Meeting Place for De Tomaso Owners and Enthusiasts From Around the World
Clicking on the banner will take you to the sponsor's website.