Reply to "TWO COLOR GT5 LIGHTS"

Just pulled one of them with the wiring. Found one bulb socket, 5 wires into the connector on the main harness side, 2 of which were used for the side marker lights which I took off and taped off, 3 wires that come out of the connector to the turn signals which has one wire that was cut and taped back together and joined with the other 2 at the single bulb socket (not by me) which also led to the side marker light at one time.

They've always worked so I thought this was the way it was suppose to be. However, when I had my side marker lights, they never did blink if they were suppose to, they just lit up.

The housing on my lenses are plastic. Also noticed that the pods in the damm where they sit have had the centers cut away. Mine are held in by 2 clamping bolts and levers on each side.

Obviously they can't be the original turn signals or lenses.

Also, looking at the 2 different wiring diagrams just now for the early and late cars, they are both showing that there should be 2 bulb sockets for the turn signals., 3 if you count the side marker lights.

Another wiring modification nightmare by the previous owner I would suspect. And I thought I had them all straightened out.

quote:

Originally posted by Cyboman:
Coz,

When you had those lights out for your repaint, did you notice one bulb socket, or two for each light? If there's only one, it's possible if there's another it could be taped back a little further down the wiring harness out of sight.

Michael