.quote:Originally posted by Joules5: The CV stub axles for the ZF side are readily available, but I don't know of anyone producing the wheel side axle flange in a CV pattern. Maybe Lloyd at RBT or Dennis at PPC would know.
Mark Williams is the only source I know of that makes the companion flange with the proper spline for the Pantera axle. They are ridiculously expensive. $5-600 each I believe! Quella used to offer a conversion kit that used these but I believe he is out of stock and doesn't sell many due to cost. The easiest thing to do is make an adapter for the u-joint flange. Mark Johnson used to make them but I don't see them at his website any more. It's just a puck that has both the CV bolt pattern and conterbored holes for socket head cap screws to secure it to the standard u-joint flange. You dont even have to remove the axle nut to do this and you can do the same thing on the inboard side if you wish, making the mod reversible. Here's a picture of such adapters.
Best,
Kelly
