Reply to "Under Dash Trims"

While in this under-dash discussion, let me share how I resolved the gawd-awful-to-get-to RH footwell relay panel problem on 2511.

I did this while redoing the interior so I had nothing in my way, but it should not be too hard to do with carpet still in place.

I removed the panel and took all the components off.

I then carefully unwrapped-straightened-routed all the wiring that went to the panel to maximize its length.

I was then able to re-position the panel components on the panel in such a manner that they all fit and no wires needed to be lengthened.

I then added two new threaded-stud mounts to re-mount the panel at the far front of the footwell.

Secured the wiring as needed and put the perforated cover on the panel.

The new position seems to not be a problem for passenger foot room. The cover protects everything, anyways.

And accessing the panel is now a LOT easier than it was when it was mounted to the underside of the dash area.

LOT easier.

Larry