Reply to "Undercoating and Rust inhibitors"

Terry M (Guest)

I used a heat gun (on low) and a putty knife. Working in small areas at a time until it became soft, then just scraped it all off. It took about a day, mainly because of my aching back. Other wise it should only a few hours. I took it off everywhere from the fire wall back. You can even use a little body filler to smooth over the spot welds before using the POR 15. Its great stuff and comes in colors for a super undercoat.

6/27/049:25 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...