Reply to "Upgrade my brakes..."

I've got a new master cylinder and I flushed the brakes and it stops very well now. Look on page 162 of your JEGS hot rod magazine, Christmas 2004, and you'll see how I'm doing the next upgrade to the braking system. Dynalite II 4 piston calipers, Polymatrix pads, two proportioning valves, front to rear bias and left to right rear brake bias,and JC Whitney has a catalog of tools, page 207 for the tools needed for redoing the hydraulics, which I had to order a few tools too, it's the 1/7/-1/11 issue. The rotors have to stay original for now. If the parts don't fit, I'll have to send them back. No restocking fees, I just lose freight cost. Reorder the right part and ask for free S&H. I'll see if I can stop 20% shorter distance at 60 mph. That's what I want. That's all I can tell you for now, except both merchants have online shopping with pictures and specs. I count on 6 to 8 weeks to get it done, a little at a time. I know I'll have a few more runs to the hardware store, the parts store, etc., but then the braking system will be 90 percent the way I want it, stopping wise.