Reply to "Vacuum"

marlinjackThe Machinist #5723 AMARGOSA MACHINE 'Running on Empty- Middle of Nowhere'

...Also; My idle RPM is 1000. I can make it idle as low as 700 or so. OR 1000-1200 sounds good. This is by the 'Dash' Tach, which is not accurate enough for this kind of work. One thing you might try is to 'Kick-up' the set screw under your Secondary Butterflys to increase RPM and then close your ptimaries to bring the Vacuum up, more. This gained me aprox. 1 or 2 more INCHES. Not a whole lot. The only reason, I can think of; why your float bowl would be draining overnight, could be a crack in the Plate or Body, or leak in a gasket, perhaps the gasket is missing behind one of the lower 'Bowl Screws'. The only other time I saw a Bowl drain, and this was at a very Fast rate; and WHILE the engine was running, was from a Blown POWER VALVE. Good-Luck with it!...

12/26/058:17 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...