Hi Steve, just thought I would mention what I did re my valve cover logos.
Mine were glued on with what looked like araldite, running everywhere.
When I refitted them I drilled from inside the valve cover, and part way through the casting, then blind tapped them 1/8" whit.
When I fitted them I used the adhesive silicone in a few spots, with a very small amount of loctite on the metal threads.
Also with the plug leads, mine has the original nylon strips that separate the leads, and the front right one slips inside the sheet metal strip bracket to keep them off the shaft as well as clear of anything that they may short on.
Regards Terry
PANTERA INTERNATIONAL
A DE TOMASO CAR CLUB
Presents the De Tomaso Forums
The On-Line Meeting Place for De Tomaso Owners and Enthusiasts From Around the World
Clicking on the banner will take you to the sponsor's website.