Here is a lid detail. I quad pined the corners so the lid re-indexes on the box without issue. Allen bolts were used with small turned aluminum sleeves as the contact material inside the air-box lineup holes. The bolt heads were tapered for easy indexing. Now for tapering the head---put the thread into a cordless drill and use a 6" grinder with a DA pad and 240 grit paper. Spin the drill into the spinning grinder at the right angle---there it is.
PANTERA INTERNATIONAL
A DE TOMASO CAR CLUB
Presents the De Tomaso Forums
The On-Line Meeting Place for De Tomaso Owners and Enthusiasts From Around the World
Clicking on the banner will take you to the sponsor's website.