quote:Originally posted by Tom@Seal Beach:
Yeah I will admit we in SoCal don't have to deal with as many weather changes unless we're going to an elevation location. Once they're set, summer, winter it usually doesn't change.
My linkage was set up with pedal stops at the bottom or WOT and with a giant flex cable that came in from the side...Don't think it could be much simpler in the center of the four carbs. No bell crank mechanism, just a bracket to hold the cable, yet would.
I notice all the current manifolds don't have a vacuum plenum...my manifold was a Mckay made from magnesium...it had about a three inch tall plenum.
Doug I would agree that once you have Webers, there is no substitute.
I'd like to see a picture of that manifold if you wouldn't mind posting one. Don't recall every seeing one. I have heard of it though.
My setup is out of the car and on the bench at the moment. Anyone want to see it, let me know I'll post a pic.