I bought a set of Webers long time ago for mine. They were purple which wasn't going to do. I have been tearing them down and rebuilding them which is good. I don't believe they have ever been used but they needed cleaned up. hings like bearings not moving well, dry gaskets, etc.
I drilled the 3rd hole and tapped it for a plug. I have been sandblasting and powder coating the carbs.
The Hall intake for the 400 needed spacers which I was not going to do. I started building my own intake but time got the better of me. I cut the Hall intake in half instead.
I did find the Hall intake put the carbs a little too close together. Linkage had to be slightly bent not to bind and the fuel rail barely went on with a little pushing.
I'll be laser cutting a plate to go in between for linkage.
What fuel pump do you guys prefer? Do you have a minimum size fuel line?
I am going to put in an O2 but the best spot or me is right against the head. I need to see if the O2 can be that close; I am not sure it can.
PANTERA INTERNATIONAL
A DE TOMASO CAR CLUB
Presents the De Tomaso Forums
The On-Line Meeting Place for De Tomaso Owners and Enthusiasts From Around the World
Clicking on the banner will take you to the sponsor's website.