My 1973 pantera still needs a wheel alignment, and i've set the date at the alignment shop at saturday 10 august.
They asked me to give them the correct technical data a few days ahead, so they could put it in their alignment computer.
At 11-20-2001 i've asked this data too, and Jack Deryke gave me an answer to that question, but now if i'm looking securely at this information, i've noticed that here in europe, camber is given in degrees and Jack's aswer was -1/8 frt camber (i guess this must be inches)
Also, I have a serious doubt of the data what was given for the rear wheel toe in.
Jack Deryke said that this must be 5/16 to 11/16" rear toe in!
IMHO I think this is very much!!
Now when I looked on this site for any recent info, I saw a topic "toe-in adjustment" posted by Marlin Jack at 05-15-2002, and I was surprised when I saw a very different data that was given by Jack Deryke, suddenly he says (quote) "If you are running anything else, toe schould be 1/16 front & back, total for two wheels"
Who can help me now with this problem, anyone who has the real correct data, please help me.
My tyre sizes are :
front : 285/40 zr15
rear : 345/35 zr15
The only thing I always did forget to ask (up until now) is the recommended tyre pressures front & rear
Thank you for your help
Greetings, Paul Ritzen.
Weert, Netherlands.
Original Post