Reply to "White smoke - runs rich"

guyman (Guest)

I had a Holley 600 on the car. I have gone through three now. I decided to try a different brand name because somehow eventually after I drive the car a short distance gas drips constantly in the secondary bowls. I took it to a "Holley Specialist" and he could not get it right either. I was thinking maybe I had too much gas pressure and it was forcing it back to the back bowls? So I put on a Edelbrock carb and it smoothed everything out. No white smoke and smooth. Now I have a problem when I start it up. It's not getting gas to the carb until I "Prime" it by putting a little gas directly into the carb. Then it will run on it's own once I give it a little gas and let it warm up for about twenty seconds. I put a new pick-up into the tank and also all new lines, new fuel pump, new filter. Anyone have this same problem. Thanks

6/25/018:54 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...