quote:
Originally posted by jack deryke:
use wide bent-aluminum L-brackets from the 4 corners of the fan shroud to the front of the rad tanks to lightly hold the assembly in place.
To lay it fwd, drill out the spot welds holding the OEM fan mounts up front. Done carefully, they can be returned to stock with a few tack-welds.
These L brackets you speak of, They don't get attached to the tanks, they just wrap around them?
Where are these spot welds holding the OEM fan mounts? My car came with the fans mounted to the radiator with the dreaded zip tie thingys.
I bought the Fluidyne radiator from Summit. It's a stock Fluidyne P/N. You have to look up the P/N on Fluidyne's website to give it to the Summit operator, because it's not listed in Summit's catalog, but they did have the best price. Fluidyne would not sell direct.
Eric