Reply to "Wilwood Clutch M/C Part #260-15098"

davidnunnMember

@jwelch68 posted

Once I had the M/C ready to mount I quickly found out it doesn't match the hole pattern on the pedal box.
Now I'm at the point of either sending the part back and reusing the Wilkinson M/C or drilling out the pedal box and force the Wilwood to fit.
John

John, rather than modifying the pedal box, just take a round file and carefully “ovalize” the mounting holes on the new M/C. Make sure you enlarge both holes by an equal amount. It doesn’t take much to make it fit.

4/21/2410:37 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...