The Wilwood switch is installed in the cigar lighter hole. I omitted the bezel for the switch making it more innocuous.
I also replaced the the large aluminum shift knob with a stock knob. I had to replace the shift rod as well because it had been modified for the nitrous setup. They somehow drilled the entire length of the rod with a small diameter bit and threaded three wires through the rod for the nitrous switch that was in the shift knob. You simply flipped up the cap on the knob and then pressed the button. Pretty much like the movies, perhaps better. They were from the school called "You never know when you'll need an extra 100hp"
