Reply to "Wilwood MC Question"

rockyMember

Hi John -

I have the same SACC Master and Proportioning valve setup as you do, although my brake booster was modified to be able to directly mount the master cylinder, instead of using the aluminum block spacer that many cars use to reconfigure the MC mounting bolt pattern.

Anyway - I had to use the plastic spacers to get the right alignment on the hardlines from the MC to the proportioning valve.

I have about 2 threads protruding from the nuts.

I am don't have the same configuration as you do, but it seems to me the problem is that the bolts on your spacer are shorter than what are protruding from my booster.

Would it be possible to get new (longer) studs to mount in the spacer block? Two threads doesn't seem like enough engagement.... You wouldn't want that MC to come loose in a hard stop.

Rocky (a.k.a. Chuck)

Attachments

Show

12/8/238:57 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Attachments

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...