Forgot to mention the Window sticks about 5mm up compared to the Outer Trim on the Door. I do not have the Interior done yet so not sure how much the Window sticks up compared to the Door Panel. I did not perform any mods to allow the Window to go any further down except I cut the holes larger on the Roller Assembly to allow the Window to sit as low as possible. The Roller Assembly is sitting on the bottom of the Door when Window is all the way down and I suppose I could grind a few mm of the Assembly and the Arm to allow it further down. Just wasn't bothered ;-)
PANTERA INTERNATIONAL
A DE TOMASO CAR CLUB
Presents the De Tomaso Forums
The On-Line Meeting Place for De Tomaso Owners and Enthusiasts From Around the World
Clicking on the banner will take you to the sponsor's website.