Reply to "Window circuit blowing fuses when the switch is operated."

Thanks for the replies.  To answer some of the above questions.  I have very little time driving the car (corner of my street at drop off two years ago (pre-COVID) to my house …that’s it.  At that point I began dissecting it fully.  Can’t remember which of the two windows actually worked.  Both original motors turn when connected directly to 12v power.  I have the wiring COMPLETELY pulled apart with the dash and heater box out of the way.  When the motors (again, newly installed Taurus versions) are connected directly they run w/o a problem.  The switches have been replaced with brand new ones because I thought too that it could be an issue internal to the old switches …still happens.  I’m not sure if there’s an issue with the other window (driver side) as I’ve not hooked that one up yet.  I suppose I should/could do that first to see if it also blows a fuse …that would likely be a simple 1st step.