Julian nice link TX!
Well I hope all works as I kept the original motor and push mechanics. The motor got new commutator "coal" and was working nicely on the bench. Push mechanics cleaned and new lubricating grease added (high end bicycle stuff).
To get the shift mechanism back in is a bit tricky as needs small hands..working on it.
I did buy 2 new wiper axis/posts from the SVC folks. Needed to cut the bushings on the top to the correct angle, as the old once where plastic and broken, using the lower old bushings as still good providing the original angle. The top once are metal now.
And sure I will test the setup WITHOUT the wiper arms as forstg suggested.!
TX
Matthias
PANTERA INTERNATIONAL
A DE TOMASO CAR CLUB
Presents the De Tomaso Forums
The On-Line Meeting Place for De Tomaso Owners and Enthusiasts From Around the World
Clicking on the banner will take you to the sponsor's website.