@Mike Barnby posted:Hi Everybody
I am on the other side of the pond and I am in the process of fitting either the Toyota Yaris or the Prius steering unit to my Pantera 2898. The Prius has a bigger driving gear with about 30% more torque but it might not go in the space, I am about to find out. I have a lot of trouble removing the dash and have had to break off screws holding it on. Nearly there!
I have both units and found that length wise they are almost the correct length, and I can get a steering wheel adaptor to fit the Toyota spline and still use my Momo steering wheel. so no cutting or welding on the top half. Just got to make a new outer tube to fit onto the Toyota gearbox.
Will send photos of the fit when I get the dash removed.
We are on the same side of the Atlantic but not on the same side of the Channel 
Since there are very few cuts to be made, for the moment I have not needed to remove the dashboard.
Beyond the steering wheel, there is the ignition switch, the indicator control and the plastic covers, how do you think you will adapt them if you do not take an external tube from a Pantera or Capri?