Skip to main content

Reply to "Yella Terra YT6015"

With reference to the sweep pattern of the rocker roller discussion, is it not the most important to get the smallest, but central to the valve tip, sweep possible? If possibly the rocker arm is higher or lower on its fulcrum or the valve tip is taller or shorter with maybe incorrect angles on the valve stem or rocker mounts, change slightly how the rocker tip rides on the valve tip. As long as the "sweep" is central on the tip and with the smallest "sweep" possible, this could be achieved using Method A or B depending on how it measures in real life?

×
×
×
×