...Pantera on Level Ground, 90 Degree Elbow in place, Fill Lube until 'Thin' Puddle Remains at bottom of the Elbow, replace Cap. End of Story !!
...Or, if You still don't get it...Over-Fill the Elbow Slightly, Temporarily turn Elbow Sideways/Downward and allow Excess to drain out. Return Elbow to upright position, replace cap. Job Done!
NO Elbow? Just over-fill SLIGHTLY and let any excess dribble-out the SIDE Hole (-2). When draining has finished replace the Plug*. Always, with the Pantera On LEVEL Ground! And, You must know, Most All Garage Floors are NOT Level...they Slant-Down, Towards the Street!
Dipstick?? You'll Never know where you started, so you'll never know where you end-up. STOP making 'Problems' out of something Simple!! GO with Positive answers...Listen to Larry!
* I always use 'Teflon Tape', but be sure to Never Over-Tighten. You'll crack the Case!
MJ