Reply to "ZF input shaft seal"

bosswrenchMember

As Ron said, sometimes its a bitch getting the old seal out. My undisturbed '72 ZF had the seal stuck in with epoxy-aluminum! But its a std seal available at any bearing supply house. The part number will be on it if you don't maul it too badly during removal. And the allens are half-height metrics that are usually very tight, so be sure you use a metric allen wrench, or you may rip the hex outa one or more screws with an SAE allen wrench.

12/14/0812:29 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...