...Yes, Pilot Bearing; Right! Did You try the NEW Bearing on the -2 Input Shaft, Dia.= .6695" (17mm)? The Dash 1 has a Smaller Input Shaft at 15mm. I Machined one Pilot Bearing for a Customer with a Beautiful GT-40; the Machine had a different Brand Transaxle than the ZF, That Input Shaft was Only 12mm in Diameter!! The Flywheel will Not Slip!! Just BE SURE to clean Both Surfaces; Flywheel And Pressure Plate, with 'Lacqure Thinner' before Installing. And have You touched the 'Disk' with Your Fingers Yet?? That's a No-No, Nothing touches the Disk; and Do Not try to clean it! You pick the Disk up with a finger through the center hole. Any grease on the Disk face can start it slipping...
PANTERA INTERNATIONAL
A DE TOMASO CAR CLUB
Presents the De Tomaso Forums
The On-Line Meeting Place for De Tomaso Owners and Enthusiasts From Around the World
Clicking on the banner will take you to the sponsor's website.