Reply to "ZF to install"

panteradougMember

quote:
Originally posted by MARLIN JACK:
...Yes, Pilot Bearing; Right! Did You try the NEW Bearing on the -2 Input Shaft, Dia.= .6695" (17mm)? The Dash 1 has a Smaller Nose... some are 15mm and others are 12mm! The Flywheel will Not Slip!! Just BE SURE to clean Both Surfaces; Flywheel And Pressure Plate, with 'Lacqure Thinner' before Installing. And have You touched the 'Disk' with Your Fingers Yet?? That's a No-No, Nothing touches the Disk; and Do Not try to clean it! You pick the Disk up with a finger through the center hole. Any grease on the Disk face can start it slipping. You Did ALL those clutch replacements? I wonder if You did any Correctly? Proves one thing!! Your Experienced at Burning them Up!...

Thanks Marlin. You're such a pal. I didn't burn them all up. I had help.

11/21/0910:38 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...