Skip to main content

Reply to "Goose Girling Clutch Solenoid"

You are correct, the inlet is the far end https://www.pegasusautoracing....ion.asp?Product=3502 . The fitting for the banjo goes to the hard line to the slave, you could use another banjo with a very small barb for the inlet (since the reservoir hoses are very small diameter). 

If in doubt, good news is that the Master cylinder is easy to find.  My car came with a 0.625" (Girling 625), https://www.burtonpower.com/gi...er-625in-brk030.html replacements on Ebay are dirt cheap (as little as $18 for Chinese copies) and match the 0.75" that you have, or 0.625 or 0.70"...Lee  

 

Last edited by leea
×
×
×
×