Finally back at it. Moving to rear suspension/brakes/bearings. Heim joint suspension wise:
- Anything besides getting grease into all plethora of heim joints thruout the rear if car tracked well before rebuild?
- Brakes and ebrakes should be straight forward rebuild as were the fronts.
- Rear bearings...if I get brakes/ebrakes off, and dragging stops when I turn disc, will probably skip new rear bearings (read thru https://pantera.infopop.cc/top...-bearing-replacement and https://pantera.infopop.cc/top...539#1598208420767539 and looks pretty painful to get at bearings to replace unless absolutely necessary)...if I go for it, looks like inside nut comes off and disc/spindle/hub assembly pulls out without needing to take anything apart (learned my lesson from the front). The question then will be the two articles above and getting bearings out and back in.
Different topic, I think the paint shop lost and then made rudimentary fabrications of my front hood latches (part # 11 page 10 of the parts manual). A picture of what this part is supposed to look like would be greatly appreciated.
-
