@rene4406 posted:In my mind, the engine position is determined by the ZF mounts and if you swap the engine mounts, you can't install the mounting screws.
But I could be wrong and I'd be happy if someone could explain how to move the engine/transmission assembly back without changing the transmission mounting points on the chassis.Back to the Progression Ignition distributor, the one I received is significantly longer than the one in the 2021 lf-tp2511 photo at the beginning of this thread. So I'm pretty sure the housing has changed.
By the way, I finished installing mine and the engine works.
Glad your engine is running with the new distributor.
Can you post a photo of your transmission mounts. It would help to see where the shim washers are positioned relative to the insulators.
In case you have not seen it, please see this posting:
https://pantera.infopop.cc/topic/motor-mount-offset
Tuesday was busy at the shop. On Wednesday I will try to measure the length of the Progression Ignition distributor along with the factory Autolite unit.