quote:>>Where did you buythe Lokar extended dipstick setup? I find I need one with my new setup because I'm now using Ford Racing tall valve covers<<<
Direct from Lokar - about $150.
For the Pantera, each one is considered a 'custom'. Study my photos and you will see the Lokar mounting bracket is off the last valve cover bolt.
Specs must be in writing for them to proceed.
I sent them this:
-------------------------------
REQUEST FOR CUSTOM ENGINE OIL DIPSTICK
I spoke with service rep Eric several weeks ago. I believe this will provide the required information for my order.
Engine is Ford 351 Cleveland
Car is 1972 De Tomaso Pantera
Dipstick measurements:
Hole in block for dipstick tube is 3/8” – 0.375”
Length of tube beyond entrance point in block is ten inches – 10”
Amount of dipstick that extends beyond end of tube in the block is 3 1/4 “
Length of tube from block entrance to mounting point is twenty-eight inches – 28”
Please provide the longer mounting bracket – 2 7/8”
Customer name: LARRY FINCH
559-281-3497 PST
Please phone to confirm order details and obtain billing information.
-----------
I thought the length would be a bit much, but it turned out to be just fine. The braided SS can be shortened at home - just regular SS hose fittings.
You might order a bit longer to cover for your routing. Each inch is a couple $ more, though.
Once you get your old unit out, you can adjust the dipstick length to match what you find on the OEM unit.
More questions, just ask.
Larry