All,
Several weeks back I posted information regarding my success in finding a machinist who was willing to tool up for replacement billet
aluminum caps as used on the Hall curved fuel filler neck sold for the early cars - ones without the gas cap in the gill.
He has added sufficient material inside the cap face to allow for drilling and tapping a small hole to be used to anchor a SS chain
to keep it from so readily being left on the gas pump. ;-)
After black anodizing, he will laser-etch the Isis logo.
I just received the following from him - he is the machinist who does
many of the parts Quella sells.
Hi Larry,
Here are some pictures of the Gas cap before I send them off to the anodizer Tuesday.
I have the chain worked out so if you would like for me to include the chain on your
caps let me know. It works out to be $5.50 for all of the 304 Stainless hardware.
Mark Johnson
303-252-4481
mjohnson@ipsco.org
Original Post
