c302b Heads + Roush A351 Intake + Pantera SVO Headers

quote:

Pantera SVO Headers - 351c w/SVO Heads (not sure which vendor)

Pantera SVO Headers - 351c w/SVO Heads (not sure which vendor) ... can you poast a pic of these?

Ron

It's been awhile but I do still have these.

http://i1271.photobucket.com/a...2012-10-17211822.jpg

http://i1271.photobucket.com/a...2012-10-17212201.jpg

http://i1271.photobucket.com/a...2012-10-17212221.jpg

http://i1271.photobucket.com/a...2012-10-17212304.jpg

http://i1271.photobucket.com/a...2012-10-17212334.jpg

http://i1271.photobucket.com/a...2012-10-17212402.jpg

was that on your car? what kind of power did you make? what's the new setup?

pm'd

thanks! that new setup looks awesome! good luck

PM sent on the parts.

hustler, you have a PM!

FWIW, those heads & intake are some 75 lbs lighter than factory Boss 351 iron heads & iron intake. With flat-top pistons, the CR will be around 10-1/2:1 and being aluminum, will still work on 87 octane fuel if you optimize the timing & add a good Holley. Note the ports have a step where the pipes meet the exhaust ports, forming a built-in anti-reversion step. I'd leave them alone and not port out the exhausts. I and several others have this setup (I paid $1200 in 1987 for a set of A-3s with that Roush intake!) and it worked spectacularly well on the street ever since.

You should get somewhere around a 50-60 bhp boost with no other changes except custom pushrod lengths, & even more with a cam swap, roller rockers etc. As a bonus, the engine will run cooler too. A really good deal!

I decided I could part with these again. I was keeping them as a back up to my race ported set, but none of my newly acquired intakes will fit these. I recently picked up a jet boat so I would be willing to trade for a set of aluminum BBF 460 heads as well depending on what you have. This whole setup is bolt-on for a pantera. I'll gladly answer any questions, but the forum has just about everything answered about these.

Ended up throwing them on the bay, had an interested buyer but unfortunately shipping to their location made it prohibitively expensive since they were outside the lower 48 states. Headers are not included in the sale, but i could work something out separately after.

http://www.ebay.com/itm/-/131539863001?