Fender Welting Needed

4nhotrodHe who dies with the most toys is dead

I'm looking for a rubber gasket with a ball (fender welting) to go inbetween the body and GR4 riveted flares. I'm looking for something with a 1/8" ball. I can't seem to find it anywhere. You can see an example if you look at..
http://www.spaenaur.com/pdf/sectionK/K6.pdf

look at #825-044
Will

11/29/083:08 AM

❤️ 0

Original Post

Replies sorted oldest to newest

lambolp400sMember

You can get most colors in any lenghts from a good VW Beetle tuning/styling shop.

11/29/085:51 AM

❤️ 0

parapanteraIf you can't fix it with a hammer.....you have an electrical problem.

J.C. Whitney has some 3/16" here, or you could have a look at Restoration Specialties, this is a link to a catalog in PDF format, go to page 110, P/N 188FW which is 1/8". And lastly, Metro Molded Parts has some 1/8", P/N LP 15-C in rubber or LP 16-C in vinyl.

That should get you started

11/30/088:20 AM

❤️ 0

johnnyalkiMember

Is this the same stuff that was used on the GT5 flares?

curious,

John

12/1/089:14 PM

❤️ 0

4nhotrodHe who dies with the most toys is dead

The original GT5's used a putty type of material that was put in between the flare and body. It's called "dum-dum" here in Canada. It's quite alot of work to install so I want mto duplicate the look with the fender welt.
Will

12/2/083:05 AM

❤️ 0

johnnyalkiMember

Will,

I am very interested in how this turns out. I hope that you will post your results when you get all this figured out.

thanx,
John

12/2/089:00 AM

❤️ 0