Skip to main content

I have the following stuff for sale. Not gonna use it...sitting in the garage collecting dust...needs new home:

all items can be shot with the ol digital camera and pics can be sent upon request...

[LIST]

  • (brand new) twin carb manifold (351c 4v) weiand. High rise intake $150.00
  • (brand new) comp cams roller lifter conversion kit for 351c $50.00
  • (brand new) comp cams hydrolic rollers for 351c $150.00
  • (brand new) set of tires from tirerack, still packaged for shipping. dunlop245/50/15s z rated tires $150/the pair
  • (brand new) set of tires - same as above, mounted on new 15x10 bassett wheels. Tires are brand new,never run on the street. Wheels are in great shape. Very light. Correct bolt pattern and spacing for front or rear. If you intend to use these in the front, you gonna have to flare it!
  • (brand new) torrington bearing setup for cam shaft timing gear. 351c block. $25.00
  • 351c 4V 4 bold main, long block. has ~30 thousand miles on it. Dyno'd at 259 HP and 270 ft lbs at the wheels. The engine has been very reliable and strong. Street and very light track use, made it to vegas twice with no issues 2003/2004, never had any problems with it. It could use new main seals. Other than that is it a very stong reliable motor. I am pulling out the driveline in the upcoming months to replace with new motor. This one may sit in the garage for months, need the space.....come and get it for $1000 obo.
  • (new) stock oil pan 351c powdercoated black. Nothing fancy, works and is new. $35.00
  • Bladez 40cc push scooter. 1 tank of fuel run through it. Impulse buy on my part. Never gonna ride it. I picked it up for 650 at fry's. Found it on the web for $599 new today...sell for $380.00to you...you lucky SOB.

    10.18.2004 - just found some brand new brake pads for the stock brake system. 2 sets of fronts, 2 rears. Make offer....
  • Last edited {1}
    Original Post

    Replies sorted oldest to newest

    sure....

    408 777 5165

    the engine is in the car for another week or so. I am finishing the engine build. If you want it sooner, no problem. I will yank it out and ship it off to ya. You can also come on over and check it out if you are in the area. It is a strong engine, runs very well and is reliable.
    i will see what I can do about the sound file...

    I posted a small clip of it going down the strait at LVMS on my website. Check out

    www.jacobsracing.com/videos

    Claude Dubois is behind the wheel and I am behind the camera. Lots of compliments on the tone of the exhaust. I think I have some of them on the video as well...

    So, you would get the pipes and the engine attached. When you listen, make sure you have some decent speakers plugged in. My laptop speakers don't do it justice. I plugged in headphones and it was great.

    Wink

    Greg
    Last edited {1}
    Post
    ×
    ×
    ×
    ×
    Link copied to your clipboard.
    ×