Power window operation (Help!!)

rmccallMember

Does anyone have any tips or tricks for aligning the window regulators to acheive
smooth operation? I bought new glass,whiskers,felt from Wilkinson. I can't get it
to work smoothly no matter what I do. I have the "Vader" window lift setup.It worked
great with the old glass and the worn out seals.
I called Steve Wilkinson but he wasn't able to help .
Any suggestions??

Thanks,
Ron

4/7/098:34 PM

❤️ 0

Original Post

Replies sorted oldest to newest

pittcrewOwner etc. of 3785

I don't know about the regulators but my window tracks have washers used as shims at the mounts to fine tune the glass alignment.
Without them my windows wouldn't go up.

4/10/0910:10 AM

❤️ 0

Pantera 3rd&LastMember

Ron,
Do you still have your old door glass? You might want to compare the glass curvature. I have heard that the Vader conversion is very good. And I would imagine that it would over come minimal track binding.

In the past I spent countless hours adjusting and aligning the window tracks. The passenger side was horribly slow. Recently I converted to Taurus motors. Even with new track rubber the windows fly up and down.

My bet is if the window glass is not OEM it is probably the curvature.

Good luck,
Jeff

4/10/092:54 PM

❤️ 0

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...