Skip to main content

Closed2 replies

snip snip.....drill drill.....screw screw....

G Guest
the rear flares are on the car...

I will be posting a video soon. For now, check out my website for some initial pics. I will be writing up a little ditty on the whole process. It was quite easy. The only thing you have to get over are the screams from the other pantera bretherin.


www.jacobsracing.com

click on 1972 detomaso on the left hand side...

comments welcome..

greg.jacobs@jacobsracing.com
Original Post

Replies sorted oldest to newest

bosswrenchbosswrenchMember
Greg, do you have a "flanging tool"? This is a press-type tool that makes a little jog in the edge of a piece of sheet metal. By doing this to both the fender and the added-on flair, the pieces lay perfectly flat for spot-welding or even seam-welding, and only a skin-coat of filler is required. Eastwood sells a flanger based on vice-grip pliers that works well if a little slow. And its cheap!
Views: 84
Post

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×