Hi,
TGIF, looking for the details of both pillar construction under the outside skin. The parts catalog shows the parts needed but not a good graphical picture. If anyone has pictures of repairs being done to the pillars down in the rocker panel area I would l appreciate any pictures you can pass on. Just another project for this winter.
Thanks again ahead of time.
Haydude
Replies sorted oldest to newest
There are some pictures of the b-pillars in this post from when I restored the chassis on my race car. We fabricated the pillers from scratch, so there are pictures of them before installation and after.
You may find a couple useful B-pillar/rocker pics in here. Keep in mind this is not only a pushbutton car, but a very early one, though I would think the bottoms of the A and B pillars are still similar to the later cars.
Rodney (ufo-low) had a bunch of pictures in his build thread that might help you....
Thank you everyone, looks like the B pillar is a little less complicated than the A. And once again our group is a plethora of info.
Push1267 - Looks like you had some major work going on.
Buttondoor - Thanks for the pics.
Rocky - I'll see if I can go back and dig up the old posts from UFO-LOW.
again, thanks for your input.
Haydude
Hello ,
Here are the reinforcements on my car
Pré L 2900
Thanks wrinkleeffect, great pictures.
Haydude
My thread is "2548's Restoration". The A pillar work starts part way down page 2, and the B pillar starts on page 3. I have more photos that I did not use in the thread; just ask if you want to see something specific and I will see if I can help.
ufo-low, thanks for the info. I've have followed a little on the progress. In the "she's back" post, she looks great. You are making great progress. Keep the pics coming.
