Skip to main content

Hi

well my top cat is getting where I want it..(ok..never manage a cat undertstood)

Interior took me a while to get it top class close to "original". Now I  am missing DOOR PLUGS (the 3 fellows in picture attached). Looked at a place starting with "W", well this is a standard part. The originlas I have on driver side have a different  "shape" .

Any help to find the "original" design from Fitat, Alfa ...etc? Europe place? As US order for a 3 $ is 20 $ at the end..

would be grate!!

Danke Matthias

Attachments

Images (1)
  • IMG_20190923_164929_resized_20190923_045039057
Last edited by matg
Original Post

Replies sorted oldest to newest

is a app 1972/73 Euro GTS..but as we know all variations  all over the place..

well..I will NOT pay 10$/part..as some folks sell it..must be found in any European car of the time.  If not I build it myself.  = one case of beer = 12 $ ..I go for 3 cases then.

driver side looks original ...big flat head and 12..15mm stemm, the top one has an angle of app 25 deg. Head same stemm..

Matthias

Go to any fabric or upholstery supply store and buy package of cover buttons in the size you need.  Get a scrap of black vinyl (one called Madrid is an exact match to oem vinyl).  It will take you about 3 minutes to make a button or an upholsterer will make them with a little press in less than a minute.  (I doubt they would even charge you for them) When we retrimmed the entire interior of my car with leather, we made the leather cover button to match, threaded a heavy duty thread inside the hole, and then pulled tight when we were ready.  Attached is a hard to see picture where you can still see the cord hanging out before we pulled it tight.

Attachments

Images (1)
  • pantera seats (480x640) (3)
Last edited by tberg

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×