Skip to main content

Closed6 replies

Brake Light Switch

S 9373smonkeyMember
Can anyone offer a substitute for the brake light pressure switch? They're on backorder with the vendor, NAPA's parts book doesn't list a switch with a 1/2(?) inch fitting, only 3/8. And I'd like to be able to go for my weekly drive, especially since it's a holiday.

Any info appreciated,

Chris
#3079

[This message has been edited by BigO3079 (edited 05-20-2002).]
Original Post

Replies sorted oldest to newest

BR Bob R. (Guest)
I have a nearly new brake light sensor available if you're interested. I bought it last year from Pantera East, but decided to eliminate the shuttle valve and use a basic tee fitting and a $5 generic sensor instead. I paid $40 for it, and will sell it for $20 plus actual shipping. Bob R. Tipo874@aol.com
BR Bob R. (Guest)
Chris, just re-read you post and remembered this is not a SAE or std metric thread. After scouring every parts store, hardware store and even my buddy's aircraft repair business, I finally removed the shuttle valve and put in a basic brass tee and a $5 generic sensor switch. That's why I have the original type replacement sitting on a shelf somewhere!
Views: 128
Post

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×