Brake rotors - alternatives ?

I assume you are keeping the original brakes and need new rotors that are the same dimensions?

Period Mustang rotors are the same and at one time someone had found 2 piece Mustang rotors with separate hats.

Read through this thread it has lots of good information;

http://pantera.infopop.cc/eve/...044/m/6570089785/p/1

Julian

If you decide to pursue the Mustang rotor option, whether it be the Wagner part numbers or the more readily available centric part numbers noted in the thread Julian previously referenced, be aware that the illustration/photo in a parts listing is perhaps a long out of dated stock photo.

MIKE DREW contacted centric a couple of years ago and had them make a small batch of just the rotors as found in the two-part original ford units. I believe they have all since been sold. Many of the advertisements, especially on eBay, picture just the rotor but are most likely going to supply a one piece hub and rotor as that is what centric is currently making as the standard replacement.

You really need to contact any potential seller and have them physically open the box to see if it is just a rotor or a rotor hub and SAE studs


Larry

Just an idea. Can't say if its a good lead, but ... there are lots of Mustang brake rotors on eBay.

If you find a "groovy" solution please share it with all of us.

KAW, in the front you can use Opel Omega B and the rear Nissan 300zx. Both need minor modifications which any Machine shop can do for you. Check out this thread and even though it says Longchamp Rotors in the title just disregard it. There I have posted links to Drawings of the 2 Rotors and an explanation to the mods required.

http://pantera.infopop.cc/eve/...981077356#4981077356

Thanks for good advice

This was very helpful and will make Our progress a Whole lot easier !!