Skip to main content

Closed2 replies

Fiberglass ducts

C comp2Member
A couple topics have come through about custom ducts albiet outside air ducts or inside brake ducts etc. I am making a duct for another car but thought I would show how the process is going.

First, is sorting out the dymentions for the plug:



Shaping the part:


Finishing the part:


This is as far as I have gotton on this part right now. The next step is to finish the part in a flawless manner. The part will be painted with automotive paint and shinned to a perfect finish. Then a 2 part mold will be made. The part will be layed up in the mold.

Gary
Original Post

Replies sorted oldest to newest

C comp2Member
Yes, LPB, the plug only has to survive the making of the mold. It is stiff if I don't deliberatly put my finger through it. It made quick work of the mock up. If it had to be stronger I would have undersized it just a hare and fiberglassed it. The main thing is it will need to be finished to a mirror flawless finish.

G
Views: 64
Post

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×