Front end shaking

Guest

Hi Jack:

See my post of 4/24/01 Would really like to get your input if you have any ideas. Since my last post, have tried Willwood Polymatrix "D" pads with a reduction in the shaking, but only by 10 -20% or so. Thanks for any help!

5/16/017:06 PM

❤️ 0

Original Post

bosswrenchMember

Shaking of the front end is almost always due to a bad rack bushing, worn tie rod ends or a worn ball joint. The life of tie rod ends & ball joints can be extennded on any Pantera by drilling & tapping holes for Zerk fittings. A full set of replecement ball joints & tie rod ends is over $750!

5/17/0110:52 AM

❤️ 0

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...