Skip to main content

after owning my car for 3 years (3840) which is a GTS model.
This car was first registered in Turin, and later exported to America, from where I bought it.

But I am still learning about these grand motor cars, so was the American GTS fitted with the pop riveted fender/wing extensions?

my car was NOT fitted with the ten inch Campagnolo wheels, and the 8 inch wheels look a bit naff, and too narrow, not filling the wheel arches very well.

If these fibreglass arches were fitted to the American model, what size wheels were generally used?

Pics would be very useful thank you.
Original Post

Replies sorted oldest to newest

The early GTS Panteras (both European and North American versions) were equipped with the same tires as the non-GTS versions. The North American "GTS" Panteras were a one year - 1974 - model. They were fitted with wheel well flare extensions for looks, not by necessity. They were only shod with C60 & H60 Goodyear Arriva tires mounted on the standard 15x7 & 15x8 wheels, same as the Pantera L.

The 15x10 wheels were developed in 1973, but I can't say with certainty when they were first fitted to the European GTS, my "guess" would be 1974. There was a period of two or three years however when the European GTS were equipped with the wider wheels, but shod with C60 & H60 Goodyear Arriva tires.

The technology to produce wide/low profile radial tires was developed by Pirelli in 1974. The Pirelli P7 tires were developed in 1975 at the request of Lancia for the "high output" version (275 - 320 bhp) of their Stratos rally car ... the car needed something better than the 205/70R14 tires of the standard model (which made 190 bhp). The first production car to be fitted with the P7 tires (besides the Lancia Stratos) was the first Porsche 911 turbo (260 bhp in 1975). I don't think De Tomaso began using them until 1976 or perhaps 1977, as the P7 tires became available in a wider range of sizes.

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×