Skip to main content

For those of you on the far left……………….coast Wink , there really is no winter or mandatory car down time. Here in Atlanta we are also fortunate to have mild winters.I did spend many evenings and weekends working through my never ending “to do list”.

My completed projects:

1. Taurus Window Motor Conversion- Cheap and not difficult even for the mechanically challenge. I should have done this years ago!

2. Installed Ignition Switch Bypass – Modest cost and well worth the peace of mind of saving my ignition switch. No brainer installation.

3. Reconditioned the electrical portion of my ignition switch. No cost and not difficult. My ignition switch now pops back out.

4. Replaced my a-arm bushings, ball joints and reconditioned the rear upright lower shafts. Not cheap. Watch for e-bay auctions from the Maserati Source. This project is a major pain and requires time and patience.

These projects and tons more can be found on Mike Dailey’s The Pantera Place web site.

http://www.panteraplace.com/Page9.htm

Happy wrenching!

Jeff
Original Post

Replies sorted oldest to newest

I'm impressed, Jeff.

That Taurus conversion is something I've wanted to do for years. But, from what I've read and heard, it can be a real challenge too.

Apparently, locating all those moving parts in the right place takes countless trial and error experiments.

Do you have any more details and pics of how you did this?
quote:
Apparently, locating all those moving parts in the right place takes countless trial and error experiments.


David,

I too feared this project for years. But the Taurus conversion is not difficult. It does not require countless measurements. Actually because of the size of the Taurus motor gear there is quite a bit of room for error.

I worked from SO Bill Taylor's article linked below. Please feel free to PM me and I can provide contact info to share more info and pics.
Jeff

http://www.panteraplace.com/Page187.htm
Post
×
×
×
×
Link copied to your clipboard.
×