bellhousing

which type are you looking for.. type 1 or type 2...

You mean the ZF type ? It is a 25/2 :-)

Does anybody use a quicktime bellhousing?

Peter, you'll have far less trouble using Mike's type 2 bellhousing due to the clutch release mechanism being incorporated into the DeTomaso part. Using a hot-rod bellhousing, you'll have to devise a whole new clutch release system. It can and has been done but will only add to delays in you enjoying your drive, plus the expense for welding, machining etc.

If you do use a QuickTime aftermarket bell housing it may be easier to install a hydraulic clutch throw out bearing, rather than coming up with your own slave cylinder mount. It has the side benefits of cleaning up the look of your engine bay and perhaps allowing for more clutch options.

Also, if you go the aftermarket bell housing direction make sure to tell them what orientation your transmission runs. Many are set up for the GT40 kit crowd, who run their ZF upside down from the Pantera. They should be able to easily make one with the bolt pattern in the correct orientation.