body part prices?

Dennis,
I would think that Roland or one of the U.S. vendors would be a good place to start. Some of them could possibly be perspective buyers. FWIW.

Bob

Wilkinson lists body parts. This might be a good starting point.

Thanks. I saw the listing on Wilkenson but I was thinking that I'd try to get a more realisitic pricing on used stuff. Then again, prices on Ebay haven't been realistic lately!

Wilkenson's are also new panels. Open the bid at what you feel they are worth and let the bidders decide. Or start with a low opening bid and a reserve of what you feel they are worth.

Dennis,

A shame that you will have to cut up what sounds like a useable body due to shipping costs. I bet shipping the pieces will amount to about the same total cost at the end of the day, just that it's spread around a few different buyers.

For the deck lid you should be able to get an idea of $ from previous eBay listings, maybe that will also serve as a measure of how used parts compare to new ones on a % basis. I suspect your location and hence total price plus shipping costs may still work against you for some items, especially those one could obtain in the contigious 48.

Julian

Actually the car had far too much damage to make it a worth while save. It got twisted right about the middle. Anything can be saved for a price but even fixed, I wouldn't want a car that was bent that badly. I've found that Ebay's prices vary from week to week. What doesn't sell for much one week goes for a fortune the next.

Hi Dennis, do you have the left and right window aluminum door trims. It clip around the outside of the window. thanks Dean

Sorry, no. All that's left is rear body panels. Most of the trim was bent in the crash, the body twisted.

thanks dennis

Can you post a picture of the car?

The doors and the rear deck lid are now on Ebay:

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewIte...ame=STRK%3AMESE%3AIT

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewIte...ame=STRK%3AMESE%3AIT

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewIte...ame=STRK%3AMESE%3AIT

The rear clip section is complete from the bulkhead back and includes the quarter panels, rear tail light valance section, engine bay wheel houses and rear frame. I don't have complete pictures of it at this time as it is packed away in the back of my garage. It is rust free with only a couple of small dents on the Q-panels.

I need the metal on the drivers side right below the quarter window. I can't tell from the picture if that's there.

Everything from the B-post back is intact but this clip is going as an entire unit. I don't have the skills or the time to cut it up any further. I was initially selling the body as a whole but shipping to the 48 was too much from here. I cut the rear clip off because I had to make room in the garage for the pushbutton.

If you ever get the itch to bust out the sawzall let me know. thanks!

Sorry, not going to happen. Its going on Ebay soon and if it doesn't sell its going to the storage shed for a while. At the prices that used parts are selling for these days, I'll be able to sell it and buy a house in 5 years when I dig it out!

Yeah I hear ya on that! Did you see what that door handle set brought($$$$$$$$) on eBay?

Yeah, kinda crazy some of the prices being realized on Ebay.

I was watching a set of Pantera Floor Mats 'as new condition' and they sold last night for $182.50. Well Pantera Proformance sell the same ones new for $110, where's the logic in that eh

Julian

how much do you think it would cost to ship one of the doors to ontario canada.?

thanks sam

A lot of the stuff that I sold on ebay sold for more than they cost new. Unless they have become unavailable without my noticing, I too don't understand the logic. I figure that they get caught up in the bidding frenzy. I had even posted their retail prices in my description. Go figure.

Sam, call Tom at 808-224-3349. He is a crater/shipper here in Hawaii that offers reasonable rates, he will give you an estimate. The doors and rear deck lie are on Ebay if you're interested.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewIte...ame=STRK%3AMESE%3AIT

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewIte...ame=STRK%3AMESE%3AIT

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewIte...ame=STRK%3AMESE%3AIT

I also have an entire rear clip (q-panels, rear tailight/valance, wheel houses, frame) all in good shape with no rust thats going up on Ebay soon if you're interested.

Plug In for Pantera International Motorsports:

I just sold this lot of body parts to P.I. They will be shipping there shortly. They are rust free and in good condition. Anyone in need of body parts should contact Jerry. No need to hassle with the shipping from Hawaii.

Did they buy the rear clip also?

Yup, he took it all!

Thanks, I will have to give them a call!!!

J

what do you need? I am parting out a car and the rear clip is good.

John

I need the metal on the drivers side right below the quarter window.
-Jason

Glad you were able to sell everything, it seems like the demand just keeps going up!